LCD Screen Turned Completely White

LCD Screen Turned Completely White

LCD Screen Turned Completely White

What can you do if the laptop LCD screen turned completely white? From my experience I can tell that this problem may be related to the following:
1. Loose connection between the video cable and the LCD screen.
2. Defective LCD screen.
3. Defective motherboard (I assume the graphics card is integrated into the motherboard).

Here’s an example of a laptop with white screen. When you turn on the laptop, it starts but the image on the screen is completely white right from the beginning. In my case it was a Toshiba Satellite M45 laptop but this problem may occur with any other brand.

Most likely you still can use the laptop with an external monitor. Just connect the monitor to the VGA port on the back or side of your laptop and then switch the video output from internal to external mode.
On Toshiba laptops you can toggle between internal and external screens using Fn+F5 keys. Hold down Fn and press on F5 until you get video on the external monitor.
On IBM laptops use Fn+F7.
On HP laptops use Fn+F4.
It’s possible that you have to use a different key combination on your laptop but you get the idea.
On some laptops, in order to be able to use the external monitor, you have to connect it to the laptop and then restart the laptop so the external monitor is detected by the laptop.

I noticed that in some cases the laptop screen may turn white because of poor connection between the video cable and the LCD screen. If you want to check this connection, you’ll have to take apart the display panel because the connector is located on the back side of the LCD screen.
These laptop service manuals and disassembly instructions may be useful.

I always check the video cable connection first. Reconnecting the video cable may fix your problem.
If reconnecting the video cable doesn’t help, most likely you have a problem either with the LCD screen or with the motherboard.

The best way to find out witch one is causing the problem is testing the laptop with another working LCD screen. Without this test you’ll have to guess because as I mentioned before this could either bad motherboard or bad LCD screen.
You’ll have to disconnect the video cable from the LCD screen (connector 2) and the inverter board (connectors 3 and 1). After that you connect another working screen and test video.

For this purpose I’m using one of my test LCD screens. My test screen is cracked and because of that you see a wide white band in the center but it still works fine for this test.
The original screen is white but my test screen works normal (except the crack of course) and I can see the image. After this test I can tell that the problem must be related to the screen.

After I assembled everything back together and connected the original LCD, it’s still white.

CONCLUSION. In my case this problem is related to the LCD screen and it has to be replaced.

Source : Http://www.laptoprepair101.com

What can you do if the laptop LCD screen turned completely white? From my experience I can tell that this problem may be related to the following:
1. Loose connection between the video cable and the LCD screen.
2. Defective LCD screen.
3. Defective motherboard (I assume the graphics card is integrated into the motherboard).

Here’s an example of a laptop with white screen. When you turn on the laptop, it starts but the image on the screen is completely white right from the beginning. In my case it was a Toshiba Satellite M45 laptop but this problem may occur with any other brand.

Most likely you still can use the laptop with an external monitor. Just connect the monitor to the VGA port on the back or side of your laptop and then switch the video output from internal to external mode.
On Toshiba laptops you can toggle between internal and external screens using Fn+F5 keys. Hold down Fn and press on F5 until you get video on the external monitor.
On IBM laptops use Fn+F7.
On HP laptops use Fn+F4.
It’s possible that you have to use a different key combination on your laptop but you get the idea.
On some laptops, in order to be able to use the external monitor, you have to connect it to the laptop and then restart the laptop so the external monitor is detected by the laptop.

I noticed that in some cases the laptop screen may turn white because of poor connection between the video cable and the LCD screen. If you want to check this connection, you’ll have to take apart the display panel because the connector is located on the back side of the LCD screen.
These laptop service manuals and disassembly instructions may be useful.

I always check the video cable connection first. Reconnecting the video cable may fix your problem.
If reconnecting the video cable doesn’t help, most likely you have a problem either with the LCD screen or with the motherboard.

The best way to find out witch one is causing the problem is testing the laptop with another working LCD screen. Without this test you’ll have to guess because as I mentioned before this could either bad motherboard or bad LCD screen.
You’ll have to disconnect the video cable from the LCD screen (connector 2) and the inverter board (connectors 3 and 1). After that you connect another working screen and test video.

For this purpose I’m using one of my test LCD screens. My test screen is cracked and because of that you see a wide white band in the center but it still works fine for this test.
The original screen is white but my test screen works normal (except the crack of course) and I can see the image. After this test I can tell that the problem must be related to the screen.

After I assembled everything back together and connected the original LCD, it’s still white.

CONCLUSION. In my case this problem is related to the LCD screen and it has to be replaced.

Source : Http://www.laptoprepair101.com

LCD Screen Turned Completely White

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj8euDDnj7DlzJKEbfwXFcryJ3Q_ZPESEmICPJm-AhxbbyOgojH9LND8jwJeexUpoaC74YxLUsWPu4vAyW8eoC7n0cjx6r2bj_vtTMS4J7Pk8tMKD_P402CXYFhDSukmUGI1PzQVFySxFVe/s72-c/1-laptop-white-screen.jpg

Laptop runs very hot and turn off

Laptop runs very hot and turn off

Laptop runs very hot and turn off

My laptop runs very hot and eventually turns off or freezes – this is one of the most common complaints I have been receiving from my customer for many years. Why it’s happening? Is there an easy fix for that?

Most likely this problem is heat related. Take a look at the following picture.

Any laptop has a cooling module which consists of heatsink and cooling fan. When laptop is working, the processor (CPU) heats up and because of that the heatsink is getting hot too. At some temperature level, the fan kicks in and cools down the heatsink.

The problem starts when the laptop cooling module collects too much dust inside. Usually dust collects between the fan and heatsink. Dust clogs the heatsink and kills normal airflow inside the cooling module. Eventually, the processor gets very hot and the laptop turns off unexpectedly or freezes. This problem can be fixed by cleaning the laptop cooling module.

Cleaning laptop cooling module.

Some laptops give you an easy access to the heatsink and fan. In laptops like that you can access the cooling module through the bottom cover.

In my example I had to remove the cooling module. Otherwise, I wouldn’t be able to remove the fan and access the heatsink. In some laptops you can remove the fan without separating the heatsink from the CPU.

After I removed the fan, I found a thick layer of dust inside the heatsink. Cleaning the heatsink should fix any heat related problems.

Apply thermal paste on the processor.

If thermal paste on the processor dried out, you should replace it with fresh thermal paste.

Remove old thermal paste from the processor and heatsink using alcohol swab.

WARNING: In some laptops the heatsink also covers the graphics chip. The part of the heatsink which covers the graphics chip might have thermal pad on it instead of regular thermal paste. Do not replace thermal pad with thermal paste! Do not apply thermal paste on the thermal pad! Just leave thermal pad alone and apply thermal paste only on the processor.

I usually use Shin-Etsu thermal paste which is relatively cheap and performs well.

After applying new thermal paste, install the heatsink and fan back into the laptop. Do not forget to connect the fan cable to the motherboard!

What if cooling module cannot be accessed easily?

In some laptops the cooling module is buried deep inside the case and cannot be easily accessed and removed. In order to remove the cooling module it’s necessary to disassemble the whole laptop but it’s only for experienced users.

In laptops like that you can use the following technique:

Buy a can of computer compressed air.
1. Blow air into the fan grill on the bottom of the laptop.
2. Blow air into the grill on the side of the laptop.Switch direction a few times until all dust is gone. Most likely this quick cleaning will fix your laptop overheating problem.

Source : Http://www.laptoprepair101.com

My laptop runs very hot and eventually turns off or freezes – this is one of the most common complaints I have been receiving from my customer for many years. Why it’s happening? Is there an easy fix for that?

Most likely this problem is heat related. Take a look at the following picture.

Any laptop has a cooling module which consists of heatsink and cooling fan. When laptop is working, the processor (CPU) heats up and because of that the heatsink is getting hot too. At some temperature level, the fan kicks in and cools down the heatsink.

The problem starts when the laptop cooling module collects too much dust inside. Usually dust collects between the fan and heatsink. Dust clogs the heatsink and kills normal airflow inside the cooling module. Eventually, the processor gets very hot and the laptop turns off unexpectedly or freezes. This problem can be fixed by cleaning the laptop cooling module.

Cleaning laptop cooling module.

Some laptops give you an easy access to the heatsink and fan. In laptops like that you can access the cooling module through the bottom cover.

In my example I had to remove the cooling module. Otherwise, I wouldn’t be able to remove the fan and access the heatsink. In some laptops you can remove the fan without separating the heatsink from the CPU.

After I removed the fan, I found a thick layer of dust inside the heatsink. Cleaning the heatsink should fix any heat related problems.

Apply thermal paste on the processor.

If thermal paste on the processor dried out, you should replace it with fresh thermal paste.

Remove old thermal paste from the processor and heatsink using alcohol swab.

WARNING: In some laptops the heatsink also covers the graphics chip. The part of the heatsink which covers the graphics chip might have thermal pad on it instead of regular thermal paste. Do not replace thermal pad with thermal paste! Do not apply thermal paste on the thermal pad! Just leave thermal pad alone and apply thermal paste only on the processor.

I usually use Shin-Etsu thermal paste which is relatively cheap and performs well.

After applying new thermal paste, install the heatsink and fan back into the laptop. Do not forget to connect the fan cable to the motherboard!

What if cooling module cannot be accessed easily?

In some laptops the cooling module is buried deep inside the case and cannot be easily accessed and removed. In order to remove the cooling module it’s necessary to disassemble the whole laptop but it’s only for experienced users.

In laptops like that you can use the following technique:

Buy a can of computer compressed air.
1. Blow air into the fan grill on the bottom of the laptop.
2. Blow air into the grill on the side of the laptop.Switch direction a few times until all dust is gone. Most likely this quick cleaning will fix your laptop overheating problem.

Source : Http://www.laptoprepair101.com

Laptop runs very hot and turn off

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEieGkoq-oeG-7NBWQUiNz5SKsvNhl4VHnUprYWAOJ8V0pg5r9W5-OGR9TwFSFnymhEqvLzUscN946qWPMInSVvMDLF0JO97KUj3uoVJR4Xj54Vg7KFUuKZhNGiYSW8e10KtozSMpYD7x34B/s72-c/clean-heatsink-cooling-fan-01.jpg